Scag SWZT Hydro-Drive

Specs

Model	Description	MSRP
SWZT-36H-14FS	36″ Hero Cutter Deck, 14.5 HP FS481V – recoil-start engine	$6,299
SWZT-48H-15FSE	48″ Hero Cutter Deck, 15 HP FS541V – electric-start engine	$6,999
SWZT-48H-20CXI	48″ Hero Cutter Deck, 20 HP CXi – electric-start engine	$7,349
SWZT-52H-18FSE	52″ Hero Cutter Deck, 18.5 HP FS600V – electric-start engine	$7,399
SWZT-52H-20CXI	52″ Hero Cutter Deck, 20 HP CXi – electric-start engine	$7,499
SWZT-61H-22FSE	61″ Hero Cutter Deck, 22 HP FS651V – electric-start engine	$7,999
SWZT-61H-25CXI	61″ Hero Cutter Deck, 25 HP CXi – electric-start engine	$8,149
	* Limited availability. Contact your local Scag dealer for specific availability information.

Product Dimensions	36″ SWZT	48″ SWZT	52″ SWZT	61″ SWZT
Length	75.5″	75.5″	76.5″	80″
Height	44″	44″	44″	44″
Tracking Width	36.25″	41.5″	41.5″	41.75″
Width (chute down)	48.5″	60.5″	64.5″	73.5″
Width (chute in transport position)	37″	49″	53″	62″
Weight	550 lb	585 lb	605 lb	700 lb

	Specification	SWZT Hydro-Drive
General	Total Fuel Capacity	5.5 gallons
	Drive Tires	18″ x 6.5″-8″ (36″) 18″ x 8.5″-8″ (48″, 52″ and 61″)
	Caster Tires	9″ x 6.5″-4″
	Seat	n/a
Drive System	Drive System Type	Hydro-Gear ZT2800 Transaxle
	Pumps	Internal Pump: 10 cc
	Motors	Internal Motor: 16 cc
	Forward Ground Speed	Up to 7 mph
	Reverse Ground Speed	3 mph
	Parking Brake	Hand lever
Deck	Cutting Widths	36″, 48″, 52″ and 61″
	Type	Hero Cutter Deck
	Cutting Height	1.5″ to 4.5″ in .25″ increments
	Deck Lift	Hand lever
	Construction	Dual-plate cutter deck constructed of 2 steel plates. Reinforcement plate at cutter deck spindles.
	Spindles	Aluminum housing with sealed ball bearings.
	Blade Engagement	Ogura GT1-BS03 (110 ft lb) Adjustable air-gap for extended life.